Here is how you can accelerate MacOS running in VMWare virtual machine in Windows 10/11.

The key performance factor: MacOS VM must run with “Virtualize Intel VT-x/EPT or AMD-V/RVI” enabled, otherwise it will run slowly.

You may not be able to enable this checkbox if your processor does not support virtualization. You need to consult with your CPU documentation to figure that out. For example, for Intel i7-10700K, we can see that the virtualization is supported:

If your CPU supports virtualization, you still may experience the following error message when enabling the needed feature in VMWare:

If it happens, do the following:

Reboot, go to BIOS and make sure that:

• Intel Virtualization is enabled
• Intel VT-d is enabled

Boot into Windows.

Under Start, search for “Core isolation”, and turn it off:

Under Start, search for “Turn Windows features on and off”, and then:

• disable “Hyper-V”
• disable “Virtual Machine Platform”

Reboot.

Go to ‘cmd’, and run the following command: systeminfo

At the very end of the report, if you see this:

then you are good to go.

However, if you see this:

then run ‘cmd’ as administrator, and run the following command:

bcdedit /set hypervisorlaunchtype off

Reboot.

Once done, make sure that the virtualization under ‘systeminfo‘ is reported as: